Apache Falls
USFS trail 1357
The route in 3D
Fly this trail over real terrain
USGS and partner elevation data build the terrain, and the US Forest Service centerline draws the route.
0.6 mi · Typical grade 10 to 12%
About 400 ft between the route's high and low points. An estimate from USGS elevation data, computed 2026-07-10; not measured in the field.
Trail facts
- Length
- 0.6 mi mapped
- Grade
- Typical grade 10 to 12% (USFS trail class TG04)
- Surface
- native material
- USFS-managed hiker season
- year-round
- USFS-managed uses
- Hiking
- Motorized status
- Non-motorized (USFS designation)
- Designation
- National trail designation
- National forest
- Pike and San Isabel National Forests
Length is the trail as the Forest Service maps it, not a trip distance. Hike out and back and you will cover it twice; check the shape of the route before you count on the figure.
This record is a snapshot of U.S. Forest Service data retrieved on 2026-07-09. It does not reflect current closures, conditions, or seasonal orders. Check with the local ranger district before you go.
Elevation
About 330 ft of climbing one way, measured in the harder direction.
- High point
- About 8,600 ft
- Low point
- About 8,200 ft
Estimates, derived from USGS elevation data sampled along the USFS-mapped route, computed 2026-07-10. We have not measured these figures in the field.
Plan a day on this trail
A day here means a typical grade of 10 to 12%. Tell the Trip Builder where you are headed and it assembles a day-specific kit with weather, daylight, and terrain in mind.
Build your kitData: U.S. Forest Service, retrieved 2026-07-09.