USGS and partner elevation data build the terrain, and the US Forest Service centerline draws the route.
6.3 mi · Typical grade 10 to 12%
About 500 ft between the route's high and low points. An estimate from USGS elevation data, computed 2026-07-10; not measured in the field.
Trail facts
Length
6.3 mi mapped
Grade
Typical grade 10 to 12% (USFS trail class TG04)
Surface
native material
Motorized status
Motorized use designated by the USFS
Accessibility
Listed by the USFS as accessible
Designation
National trail designation
National forest
Pike and San Isabel National Forests
Length is the trail as the Forest Service maps it, not a trip distance. Hike out and back and you will cover it twice; check the shape of the route before you count on the figure.
This record is a snapshot of U.S. Forest Service data retrieved on 2026-07-09. It does not reflect current closures, conditions, or seasonal orders. Check with the local ranger district before you go.
Elevation
About 770 ft of climbing around the loop.
High point
About 9,200 ft
Low point
About 8,700 ft
Estimates, derived from USGS elevation data sampled along the USFS-mapped route, computed 2026-07-10. We have not measured these figures in the field.
Quandary Peak is about 41 miles away straight-line. We hike it, verify conditions, and keep a full guide for it.
A day here means a typical grade of 10 to 12%. Tell the Trip Builder where you are headed and it assembles a day-specific kit with weather, daylight, and terrain in mind.
