USGS and partner elevation data build the terrain, and the US Forest Service centerline draws the route.
0.1 mi · Typical grade 20 to 30%
About 50 ft between the route's high and low points. An estimate from USGS elevation data, computed 2026-07-10; not measured in the field.
Trail facts
Length
0.1 mi mapped
Grade
Typical grade 20 to 30% (USFS trail class TG06)
Surface
imported compacted material
Motorized status
Motorized use designated by the USFS
Accessibility
Not listed by the USFS as accessible
Designation
National trail designation
National forest
Wayne National Forest
Length is the trail as the Forest Service maps it, not a trip distance. Hike out and back and you will cover it twice; check the shape of the route before you count on the figure.
This record is a snapshot of U.S. Forest Service data retrieved on 2026-07-09. It does not reflect current closures, conditions, or seasonal orders. Check with the local ranger district before you go.
Elevation
High point
About 800 ft
Low point
About 750 ft
Estimates, derived from USGS elevation data sampled along the USFS-mapped route, computed 2026-07-10. We have not measured these figures in the field.
Plan a day on this trail
A day here means a typical grade of 20 to 30%. Tell the Trip Builder where you are headed and it assembles a day-specific kit with weather, daylight, and terrain in mind.
